Produkter

Grafit PTFE-packning med Aramidhörn

Grafit PTFE-packning med Aramidhörn

Description It is woven together with aramid fibers and black teflon through special process. The high strength aramid material is coated around four angles of the packing, making the product more insusceptible to abrasion. A combination of aramid fiber with excellent properties of black PTFE fiber......

modell:SG-P2405

skicka förfrågan

produkt beskrivning

Description 

It is woven together with aramid fibers and black teflon through special process. The high strength aramid material is coated around four angles of the packing, making the product more insusceptible to abrasion. A combination of aramid fiber with excellent properties of black PTFE fiber makes the product more resistant to wear and tear, have better lubrication and heat transfer performance, expand the application in high pressure conditions, suitable for high speed and high dynamic sealing medium pressure.


Ansökan

Applied to chemical, solvents, corrosives, air, water, steam, gases, ammonia, oils, paper stock, liquor, condensate.

Can be used in the chemical, agricultural chemical, petrochemical, aviation, aerospace, pharmaceutical, sugar, paper making, electric power industries;Reciprocating pump, mixer, stirrer, reactor, mixer, valve, etc.Suitable for water, sewage, oil, grease, weak acid, and weak base solution, acid and alkali solution, grinding media and so on.


Specifikation

Temperatur

-100-280 (en ”ƒ)

Tryck

Rotationspump8MPa, Kolvpump 20MPa, Valve25MPa

PH-intervall

2-14

Linjär hastighet

20m / s

Size

3 * 3mm-90 * 90mm (eller som förfrågan)


Type to choose

Item

Type

Density (g/cm3)

Aramid Fibre Braided Packing

SG-P2400

1.25~1.45

Aramid fiber packing impregnated with PTFE

SG-P2401

Nomex fiber flätad förpackning

SG-P2402

Röd aramidförpackning

SG-P2403

Kevlar / Aramid fiberpackning med kiselgummi kärna

SG-P2404

Graphite PTFE packing with aramid corners

SG-P2405

Aramid fiber with black PTFE packing

SG-P2406

Carbon fibre packing with aramid corner

SG-P2407

PTFE förpackningsarmamon

SG-P2408

Graphited spun aramid gland packing

SG-P2409

 

1.It is high-quality combination of PTFE with graphite incorporated yarn with corner of Kevlar fiber, to prevent gap extrusions with the high pressure and temperature range.
2. It is made from pure 100% Dupont’s Kevlar Yarn incorporated with Graphite Teflon GFO yarn throughout the sliding surface in alternated strips.

3. Bra glidhastighet och värmeledningsförmåga. Den bearbetades med hög smörjmedel och impregnerad PTFE-emulsion.
4. It is a low friction, wear=resistant packing . Long Service life due to good sliding properties;No gap extrusion.

Heta etiketter: Grafit PTFE-packning med Aramid Corners, Kina Grafit PTFE Packning med Aramid Corners, Kina Grafit PTFE Packning Med Aramid Corners leverantörer, Kina Grafit PTFE Packning Med Aramid Corners Tillverkning, Kina Grafit PTFE Packning Med Aramid Corners Factory, Grafit PTFE Packning Med Aramid Corners Made In Kina, grafit PTFE-packning med Aramid Corners-tillverkare, grafit PTFE-packning med Aramid Corners-leverantörer, grafit PTFE-packning med Aramid Corners-fabriken, grafit PTFE-packning med Aramid Corners-pris, anpassad grafit PTFE-packning med Aramid Corners, grafit PTFE-packning med Aramid Corners gratis prov , Kvalificerad grafit PTFE-packning med Aramid Corners, rabatt grafit PTFE-packning med Aramid Corners

relaterade kategori

skicka förfrågan

Vänligen gärna ge din förfrågan i formuläret nedan. Vi kommer att svara dig om 24 timmar.
验证码,看不清楚?请点击刷新验证码